Home > Graphic Laminators > Encore Series


AGL Encore is capable of mounting and laminating up to 62” wide laminates. This unit features a pneumatically actuated nip assembly as well as a pneumatically actuated pull roll assembly making ease of use unparalleled in the industry. There is a dial-in shim assembly for mounting and laminating several different thickness’ of products as well as a mechanical unwind tension system to assure repeatable results. Capable of running up to 15 ft per minute.  

The Encore series is available in 4 different models:

  Encore Maxim Dual heated rollers,
Bi-Directional, full of operator friendly options
  Encore DHR Dual heated rollers,
Bi-Directional unit
  Encore SH Single heated roller (top). Pressure sensitive, 1 sided heat activated films, and mounting.
  Encore NH No Heat, cold unit.
Pressure sensitive and mounting.



   Encore Brochure
 Additional features and specs.






  Manual Tension             

  Pneumatic Tension        
  320° Heated Top Roller
  320° Heated Bottom Roller    
  Output Slitting        
  Unwind Slitting (upper)        
  Rotary Outfeed Trimmers        
  Thermal Encapsulation    
  P.S. Overlaminating
  Maximum Mounting Thickness 1.19 1.19 1.19 1.19
  RTS Brakes opt. opt. opt.
  Easy Web Infeed   opt. opt.
  Curl Cam        
  Web Cooling    
  Rubber Pull Rolls      

  Physical Dimensions/Power Requirements

  Overall Width: 89"
  Maximum Depth: 57"
  Maximum Height: 58"
  Weight: 2650 lbs. (approx.)
  Control Voltage: 220vac/50-60hz/1 Phase/60 Amp

Copyright © 2005 Advanced Greig Laminator, Inc. 
All rights reserved. Revised: October 19, 2018